1.5 mm steel chassis.
2×120 Wrms / 8Ω power.
Two 340 VA toroidal transformers for the audio stages, plus 10 VA for the digital stages.
High-quality and shielded MKP coupling capacitors.
Bipolar transistor and LED current sources to ensure perfect voltage stability.
New tellurium copper speaker outputs.
Dual push-pull MOS-FET power stage.
Class A/B output stage biasing.
Possibility of choosing standby mode: Low consumption or preheating.
Two volume attenuators: 1 per channel to maintain the dual mono architecture.
Possibility to manage balance and memorize it.
Possibility to rename the inputs.
High contrast OLED display (on or off mode after 5 seconds of inactivity).
Double-sided printed circuits with nickel/gold finish.
ATOLL global remote control supplied as standard.
The IN200 EVO can receive the following optional boards
– DAC boards: DA100 and DA200.
– PHONO boards: P50 and P100 (can be combined with DAC boards).
Technical data
Power in Wrms/channel/8Ω (230v): 120 W
Power in Wrms/channel/4Ω (230v): 200 W
Power supply: 2×340 VA + 10 VA
Total capacitive: 59 220 µF
Number of inputs: 5+1 BY-PASS
Power consumption with switch off: 0 W
Power consumption in standby (low consumption): <0.5 W
Power consumption in preheating mode: 18 W
Power consumption in operation: 19 W – 600 W
Input impedance: 220 kΩ
Maximum input level: 3.5 Vrms
Sensitivity: 350 mV
Signal/noise ratio: 100 dB
Distortion at 1 kHz: 0.05% / (10 W)
Bandwidth: 5 Hz – 100 kHz
Rise time: 2.5 µs
