Width
17.50 in (444 mm)
Depth (including connectors)
17.68 in (449 mm)
Height (including feet)
4.78 in (121 mm)
Gross Weight
41.2 lbs (18.7kg)
Net Weight
29.8 lbs (13.5kg)
Gain Range
-93dB to +14dB
Channel Matching
0.05dB
Input Impedance (at 1kHz, BAL / SE)
50kΩ
Output Impedance BAL / SE
200Ω / 50Ω
BYPASS MODE (ANALOG INPUTS, TONE / EQ / SUBWOOFERS DISABLED)
Maximum Output Level BAL / SE
18Vrms / 9Vrms
Frequency Response (-3dB, 50Ω source impedance)
1Hz – 2MHz
Harmonic Distortion (measurement bandwidth: 90kHz)
<0.0004% at 1kHz
<0.0005% at 10kHz
<0.0006% at 20kHz
Intermodulation Distortion (measurement bandwidth: 90kHz)
<0.001%
Maximum Input Level BAL / SE (at 0dB gain)
9Vrms (+21.3dBu) / 4.5Vrms (+15.3dBu)
Signal-to-Noise Ratio (A wtd) (22kHz BW, ref 9Vrms)
130dB (133dBA)
Crosstalk (one channel undriven) (BAL / SE)
-143dB (100Hz), -140dB (1kHz), -124dB (10kHz)
PHONO SECTION (0DB GAIN, BYPASS MODE, XLR2 IN, MAIN XLR OUT)
RIAA Deviation (20Hz-20kHz)
< 0.2dB
Selectable Load for MM Type (47k II)
50pF, 100pF, 150pF, 200pF, 250pF, 300pF, 350pF, 400pF, 450pF
Selectable Load for MC – Low Output
7.5Ω, 10Ω, 33Ω, 50Ω, 82Ω, 100Ω, 330Ω, 1kΩ
Load for MC – High Output
47kΩ
MM, MC – HIGH OUTPUT
Gain (1kHz, 20Ω source impedance)
41.5dB
SNR (22kHz BW, ref 5mVrms in)
86dB (93dB A-wtd)
Max Input Level (overload ref 5mVrms)
11dB (20Hz), 23dB (1kHz), 34dB (10kHz)
MC – LOW OUTPUT
Gain (1kHz, 20Ω source impedance, 1kΩ load)
60dB
SNR (20Hz-20kHz)
68dB (74dB A-wtd)
Max Input Level (overload ref 0.5mVrms, 1kΩ load)
12dB (20Hz), 31dB (1kHz), 52dB (10kHz)
Power (nominal input, 0dB gain, 32Ω load)
540mW
Output Impedance
6.8Ω
File formats and sample rates supported
Usb-f
44.1k, 48k, 88.2k, 96k (iOS specific)
Usb-b
32k, 44.1k, 48k, 88.2k, 96k, 176.4k,192k, 352.8k, 384k
DSD64, DSD128, DSD256 (native - requires Thesycon/Classe driver for Windows) DSD64, (DoP)
Ethernet
WAV, AIFF, ALAC, FLAC, WMA, AAC,
MP3, OGG_VORBIS (max 192k/24b)
DSD64, (DoP)
SPDIF (opt, coax, AES / EBU)
PCM 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192k / DSD64
Input / output complement analog in
Bal / xlr
2 pairs (XLR2 can be assigned as BAL phono in)
Se / rca
2 pairs
Phono RCA
1 pair
Digital in
HDMI *(optional)
4* (HDMI 2.0b w/HDCP 2.2)
Usb-f
1
Usb-b
1
SPDIF Coaxial
3
SPDIF Optical
3
Spdif aes / ebu
1
Ethernet
1
Outputs
HDMI *(optional)
1* (HDMI 2.0b w/HDCP 2.2)
Bal / xlr
5 (configurable: 2pairs+1sub, 1pair+1sub pair,…)
Se / rca
5 (configurable: 2pairs+1sub, 1pair+1sub pair)
Automation
DC Triggers In / Out
2 sets
CAN Bus
1 set in / out
RS-232 over RJ-45
1
