21 cm Kevlar coaxial woofer + dual tweeter integrated into a fixed frame.
The IN-WALL speaker, as the name suggests, is a speaker that is flush with a wall or ceiling. With a small footprint and a discreet design, it makes it possible to replace a more conventional speaker.
The 210 ROT2 PRO is easily attached, just make a perfectly round hole of 252 mm in diameter but in order to help you a paper model comes with all the speakers.
Then, simply disassemble the magnetic protective grille. Once the grille has been removed and the speaker has been wired (either by soldering or by terminal block), only a Phillips screwdriver is needed. All you have to do is turn the 4, 6 or 8 screws (depending on the model), so that small hooks will tighten the speakers in their recess.
INWALL speakers such as the 210 ROT2 PRO do not claim to replace bookshelf speakers, whose load volume and filter have been optimized, nevertheless, particular care has been put in place for their sound quality: Braided Kevlar fiber driver, double textile dome tweeter.
The intrinsic characteristics of the speakers used mean that they can work just as well with an almost infinite or reduced rear load. Depending on the rear volume, the level of the bass frequencies will be slightly modified.
Recommended volume: 10 to 15 liters for 210 ROT2 PRO
Max power: 150 W
Recessed depth: 97 mm
Woofer: 21 cm kevlar
Crossover frequency: 40-21 KhZ
Output: 90 dB
Impedance: 8 Ohms
Inwall Size: 292 mm (D)
Recessed Hole: 252 mm (D)
Weight: 1.7 kg (Piece)
