The DAC2X V2 also features a multitude of inputs allowing a host of connectivity options and support for up to 24bit,192kHz and DSD (via DoP) on all PCM inputs including USB.
The DAC2X V2 also supports up to DSD128/2xDSD and DXD (352 and 384kHz) streaming over USB Audio.
Proprietary hardware galvanic isolation for the USB Audio interface.
MFAST™ vs. conventional PLLs
Most converters utilize PLL (Phase Lock Loop) circuits. MFAST™ has two distinct advantages. It’s a high-speed asynchronous system that acquires any data stream almost instantaneously. Moreover, unlike PLLs which merely attenuate jitter, MFAST™ strips jitter out of the audio stream completely. Enabling you to enjoy pristine sonic clarity whether the incoming data stream is pure or anything but.
New Updated MDAT2™: DSD512/8xDSD Upsampling
The Updated Meitner Digital Audio Translator (MDAT2™) upsamples digital audio to DSD512/8xDSD. Eight times that of standard SACD sampling rate.
Proprietary DSD512/8xDSD Discrete Dual Differential D-to-A Converters
We were not willing to accept the inherent non-linearities of every mass-market chip created to date. Neither should you.
Latest generation MFAST™ technology for instant signal acquisition, jitter-free performance
Latest generation DSD512/8xDSD Meitner Digital Audio Translator (MDAT2™) signal processing technology
Latest generation DSD512/8xDSD proprietary discrete dual differential D-to-A converters
Exclusive aerospace-grade composite laminate circuit boards
EMM Optilink proprietary interface for connection to matching TSDX CD/SACD Transport
Precision-machined aluminum chassis
Precision-machined aluminum infrared remote control
Polarity inversion performed in the digital domain
24bit,192kHz and DSD support on all PCM inputs including USB
DSD, DSD128/2xDSD and DXD (352 and 384kHz) streaming over USB (DoP specification)
Galvanically isolated USB audio interface
USB port for future software upgrades
Serial port for wired remote control
New optimized reference power system
– Power factor corrected
– Factory set to 100V or 115V or 230V, 50/60Hz
– Power consumption: max. 25 W
CE compliant
Specifications
Digital inputs
EMM Optilink (CD/SACD)
Supports up to 24bit, 192kHz and DSD (via DoP) on all PCM inputs: AES/EBU, USB Audio, 2x SPDIF Coax, 2x S/PDIF Toslink
USB Audio also supports streaming DSD, 2xDSD, DXD (352 and 384kHz)
Stereo Analog Outputs
XLR and RCA
Output Impedance
300 ohms balanced (XLR)
150 ohms unbalanced (RCA)
Output Levels
XLR outputs: 4.6V (+15.45dBu)
RCA outputs: 2.3V (+9.45dBu)
