• Audiophile quality Class A/B output stage.
• Linear power supply with a hefty toroidal transformer and plenty of filtering.
• Designed to sound great with every speaker and all types of music.
• The perfect choice to drive three pairs of surround or height speakers.
The BasX A6 is a six-channel power amplifier that delivers 90 watts/channel into 8 Ohms and 125 watts/channel into 4 Ohms, all channels are driven, with a rated THD+N of <0.02%, and an A-weighted S/N ratio of 112 db. The BasX A6 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High-quality industry standard unbalanced RCA inputs enable the BasX A6 to be used with almost any preamp or processor and audiophile-grade five-way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A6 to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A6 is a great choice if you're looking for a high-quality multi-channel amplifier to power three pairs of height speakers, or four pairs of height speakers and a pair of surrounds, or front wides and surrounds, extension speakers, or anywhere you need six channels of high-quality amplification. Also, with the use of a “y-adapter,” this amplifier would be the perfect solution for bi-amping your front stage.
Size and Weight
Dimensions (WxHxD) 432mm x 102mm x 394mm
Weight 16.33kg
Audio Specifications
Power Output (ALL channels driven) 90 watts RMS per channel; 20 Hz – 20 kHz; THD <0.1%; into 8 Ohms
125 watts RMS per channel; 1 kHz; THD <1%; into 4 Ohms
Power Output (two channels driven) 120 watts RMS per channel; into 8 Ohms
175 watts RMS per channel; into 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load) 20 Hz to 20 kHz (+ / – 0.02 dB)
Broad Band Frequency Response 10 Hz to 80 kHz +0/-1.8 dB
THD + noise <0.02% (A-weighted); ref rated power
Signal to Noise Ratio (8 Ohm load) >112 dB; ref rated power; (A-weighted)
Minimum Recommended Load Impedance (per channel) 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load) >500
Input Sensitivity (for rated power; 8 Ohm load) 1.2 V
Gain 29 dB
Input Impedance 27 kOhms
Input and Output Connections
Input Connection Unbalanced (RCA); one each per channel
Speaker Output Connections Audiophile grade 5-way binding posts
Trigger 5 – 12 V (AC or DC); <10 mA input current required
12 VDC; can drive any load up to 120 mA.
Power Requirements
Power Requirement 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected)
Front Panel Controls and Indicators
Standby Push button
Status LED One per channel; blue
Status LED Change to red to indicate a fault condition
Standby LED Amber
Rear Panel Controls
AC Power switch Rocker switch (switches AC main power)
Status LEDs switch Disables front panel Status LEDs
Mechanical
Protection The BasX A6 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions
