This also ensures that the sound performance is always defined and consistent, depending less on the wall construction and the available space behind the wall.
Unique features
Adjustable tweeter for immersive audio
The D-5 IC model features an angled, adjustable tweeter. Together with the square cabinet design, this construction allows the sound to beam towards the listening area, for example when used as height speakers for immersive audio, mounted above in front, at the sides, or behind the listeners. The tweeter radiation can further be fine-tuned after the installation.
Pre-mounted loudspeaker enclosure
Both D-5 and D-5 IC models come with their own pre-mounted loudspeaker enclosure, so that no after-market backbox or closed wall cavity is required. This ensures that the sound performance is always defined and consistent, depending less on the wall construction and the available space behind the wall.
Lyngdorf Audio speaker design and drive-units
The D-500 and D-5 woofers, midrange drivers and tweeters are designed by Lyngdorf Audio and feature soft-dome tweeters, light aluminum cones, and powerful vented magnets..
Specifications
Lyngdorf D-5
Model
Lyngdorf D-5
Description
2 way speaker
Tweeter
25 mm / 1” soft dome
Midrange driver
180 mm, 35 mm voice coil, aluminum cone, vented magnet
Enclosure
Closed MDF cabinet
Frequency range
80 – 20,000 Hz (-3 dB)
Nominal Impedance
4 Ohm
Sensitivity
89 dB (2.83V/1m)
Power handling
100 W (IEC)
Maximum SPL
106 dB
Crossover point
2,2 kHz
Connections
Binding posts
Mounting
In-wall
Dimensions with grill (W x H x D)
362 x 362 x 109 mm / 14.25 x 14.25 x 4.3 inches
Cut-out dimensions (W x H x D)
334 x 334 x 104 mm / 13.2 x 13.2 x 4.1 inches
Weight
6,4 kg / 14.1 lb
