MASS Satellite
Two-way, sealed cabinet, tuned for wide dispersion and optimal integration with MASS Subwoofer
Rigid, braced and fibre-reinforced cabinet
Custom-weave cloth finish, unique to Monitor Audio
Compact design, with point-source acoustic alignment for precise audio focus and response
31/2" (89 mm) Mid-Bass driver featuring;
MMP II (Metal Matrix Polymer) cone technology
Advanced FEA simulation used to optimise the cone & motor unit performance
3/4" (19 mm) soft dome tweeter with thermal protection
Integrated stand-mount point and wall bracket (compatible with MASM bracket)
Rear cover concealing binding posts
MASS Subwoofer
Compact, sealed enclosure with braced 15 mm MDF construction and rigid 18 mm MDF baffle
Custom-weave cloth finish grille
8" (203 mm) long-throw driver with MMP II cone
120 W Class-D amplification for efficient, powerful performance
Digital Sound Processing DSP providing accurate filter characteristics
Advanced limiters guarantee controlled, authentic sound
3 pre-set modes (‘Music’, ‘Movie’, ‘Impact’) for superlative acoustics
Specifications
Satellite Specifications
System Format
2-Way
Frequency Response (-6 dB)
105 - 34,000 Hz
Sensitivity (1W@1M)
80 dB
Nominal Impedance
8 ohms
Minimum Impedance
4.4 ohms @ 300 Hz
Maximum SPL
98 dB (Pair)
Power Handling (RMS)
30 w
Power Handling (RMS) With Amplifier Crossover (150 Hz)
70 w
Recommended Amplifier Requirements
25 – 100 W
Bass Alignment
Sealed Enclosure
Crossover Frequency
3.0 kHz
Drive Unit Complement
1 x 31/2" (89 mm) MMP II Mid-Bass Driver
1 x 3/4" (19 mm) Soft Dome Tweeter
External Dimensions (Including Grille and Terminals (H x W x D))
147 x 122 x 107 mm (513/16 x 413/16 x 43/16")
Weight (each)
1.12 kg (2 lb 8 oz)
Subwoofer Specifications
System Format
Sealed cabinet, 15 mm MDF construction with 18 mm base and front baffle
Internally braced with sealed amplifier compartment
Lower Frequency Limit
-3 dB @ 35 Hz / -10 dB @ 30 Hz (Free Field)
Default preset: Music, -3 dB @ 34 Hz / -10 dB @ 25 Hz (In Room)
Upper Frequency Limit
-6 dB @ 150 Hz
Drive Unit Complement
1 x 8" (200 mm) MMP II subwoofer driver featuring a 2" long throw voice coil
Linear Driver Excursion
15 mm Peak to Peak
Amplifier Output
120 w
Amplifier Classification
Class D with high current Switch mode power supply (SMPSU)
Phase Control
0 Degrees & 180 Degree pure Invert
Low Pass Filter Alignment
2nd order (12 dB/Octave), from 50 Hz to 150 Hz
Auto Sensing Input Requirements
Line Level >3 mV Auto Standby feature after 20 minutes
Audio Input/Outputs
LFE unbalanced input RCA
Stereo unbalanced inputs RCA
Connection
12 V Trigger in (3.5 mm mono mini-jack, 4v threshold)
Electrical Certifications
CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)
Mains Input Voltage
100 – 240 Vac, 50/60 Hz
Power Consumption
Maximum 130 W, Standby <0.5 W (ErP compliance)
Fuse Type
20 mm T8AL 250VAC
External Dimensions (Including Amp, Drivers and Terminals (H x W x D))
340 x 320 x 350 mm (133/8 x 125/8 x 133/4")
External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))
359 x 320 x 350 mm (141/8 x 125/8 x 133/4")
Weight (unpacked)
10.2 kg (22 lb 8 oz)
