Unique isolation options | Rotatable mid-tweeter array | Removable port bungs I Suited to custom-built mounting behind an acoustically transparent screen | 1 x MPD Transducer | 2 x 8" RDT Driver I 2 x 2.5" C-CAM Driver | Magnetic grilles | THX® Certified
Specification
THX Certification
THX® Certified Ultra
System Format
3 Way
Sensitivity (2.83 Vrms @ 1 M)
90 dB
Maximum Linear SPL**** (@1m, free space)
Continuous 109 dB, Peak 122 dB
Power Handling (RMS)
Continuous 350 W, Peak* 1400 W
Nominal Impedance
4 Ohms
Minimum Impedance (20 Hz - 20 kHz)
3.8 Ohms
Recommended Low Frequency Crossover Frequency
80 - 100 Hz (High Pass)
Recommended Amp Requirements (RMS)
200 - 1400 W (IA750-2 or IA750-4)
Bass Alignment
Ported**
Port Tuning Frequency
47 Hz**
LF Extension, In Wall, With Port Bungs (- 6dB)
47 Hz
LF Extension, In Free Space, No Port Bungs (- 6dB)
47 Hz
HF Extension (-6dB)
>30 kHz
Drive Unit Complement
2 x 8" RDT Driver
2 x 2.5" C-CAM Driver
1 x MPD Transducer
External Dimensions (Cabinet Only (H x W x D))
904 x 300 x 160 mm (359/16 x 1113/16 x 65/16")
External Dimensions (Inc Grille) (H x W x D)
904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16")
Max External Dimensions (Inc all Fittings) (H x W x D)
904 x 300 x 173.6 mm (359/16 x 1113/16 x 613/16")
Weight
30 kg (66 lb)
Conditions
* Calculated from a peak voltage, this is not a true power figure but useful for comparisons.
** When used in an In-Wall or On-Wall configuration it is recommended to use the fitted port bungs to control bass output. This will effectively make the product a sealed box.
*** Band limited with Low pass at 200 Hz, should only be used with IA800-2C and the correct speaker profile.
**** Tested with a music like noise signal with distortion and power compression remaining below audible limits.
THX
THX® Certified Loudspeakers.
THX® and the THX® Logo are the property of THX® Ltd., registered in the U.S. and other countries.
