ADVANCED Shock-Mount™ Feet
Founder Floorstanding Speakers include Advanced Shock-Mount™ Feet which decouple the cabinet from the floor, not just once, but twice, for extremely effective vibration decoupling. Interchangeable hardware is included for both carpet and hard surfaces. The feet can be adjusted from above to level the cabinet with ease.
ADVANCED Shock-Mount™ System
The Founder Series midrange and bass drivers are mechanically decoupled from the front baffle by our Advanced SHOCK-MOUNT™ Isolation Mounting System. This special mounting hardware uses an elastomer suspension to prevent any transfer of vibration from the driver to the cabinet, and from the cabinet to the driver. By eliminating resonance, the driver is free to render sound purely and efficiently with no audible distortion and maximum clarity.
Cascade-Fusion Bracing
Cascade-Fusion Bracing inside Founder Series’ faceted cabinets increase rigidity and break up standing low-frequency waves. This delivers much tighter bass with greater clarity and accuracy. All bracing is extensively reinforced, making the cabinet into a monolith stronger than the sum of its parts. The inherent strength of the geometric cabinet profile distributes the load points across a larger cabinet area providing greater support and rigidity than can be achieved with traditional square cabinet geometry.
DESIGN 5-driver, 3 way floorstanding, ported enclosure
CROSSOVER 2nd order electro-acoustic at 2.1 kHz (tweeter), 2nd order @ 500 Hz (bass)
FREQUENCY RESPONSE ON-AXIS ±2dB from 42 Hz - 23 kHz
HIGH FREQUENCY DRIVER 1" (25mm) AL-MAC™ Ceramic Dome with Oblate Spheroid Waveguide (OSW™) and Perforated Phase-Aligning (PPA™) Tweeter Lens, ferro-fluid damped / cooled
BASS FREQUENCY DRIVER Three 7" (177mm) Ultra-HighExcursion CARBON-X™ Unibody Cone, Gen3 Active Ridge Technology (ART™) with Vertical Mounting System, Advanced SHOCK-MOUNT™ Isolation, and a 1.5” high-temp multi-layered voice coil with ventilated Apical™ former
MIDRANGE FREQUENCY DRIVER 6” (152mm) AL-MAG™ Cone with Perforated Phase-Aligning (PPA™) Lens, SHOCKMOUNT™ Isolation Mounting System, and a 2” high-temp multi-layered voice coil with ventilated Apical™ former
LOW FREQUENCY EXTENSION 26 Hz (DIN)
SENSITIVITY ROOM / ANECHOIC 93 dB / 90 dB
FREQUENCY RESPONSE 30° OFF-AXIS ±2dB from 42 Hz - 20 kHz
SUITABLE AMPLIFIER POWER RANGE 15 - 350 watts
MAXIMUM INPUT POWER 250 watts
IMPEDANCE Compatible with 8 ohms
DIMENSIONS HXWXD 41.9” x 12.9” x 16.1” (106.5cm x 32.8cm x 40.9cm)
WEIGHT 72 lbs (32.7 kg) each
